Tigard is a city of single-family neighborhoods, townhome developments, and a solid mix of small commercial properties. The housing stock runs from postwar ranches to homes built in the last decade, and the equipment inside them spans nearly as wide a range. Some properties still have the original forced-air furnace and no cooling at all. Others have had heat pumps added, ductless units installed in additions, or smart thermostats wired in over the years. Whatever the system, we work on it.
Property managers handling multi-unit buildings and homeowners dealing with a system that stopped working overnight call us for the same reason: they need somebody who can scope the problem on the phone and get a visit scheduled without delay. We cover Tigard and the surrounding Washington County area every day from 8:00 AM to 9:00 PM.
Call (971) 459-8956 to get a price and set up your appointment.
A heat pump handles both heating and cooling from a single outdoor unit, which makes it a practical fit for homes that want to move away from a gas furnace without adding a separate air conditioner. When a heat pump reaches the end of its service life, the replacement involves load calculation, equipment selection matched to the home's square footage and insulation, and a full commissioning check before the visit ends. If the existing air handler can stay, we say so. If it needs to go with the system, that gets explained before anything is ordered.
A large share of homes in this part of Oregon were built without central air conditioning. A ductless mini-split is often the most practical way to add cooling to a home that has no duct infrastructure, or to bring comfort to an addition or converted space that the existing ducts never properly reached. Installation involves an outdoor condenser, one or more wall-mounted indoor units, and refrigerant lines connecting them. No duct demolition, no major construction. We assess the layout and recommend the right number of zones before any equipment is selected.
A system that runs for long stretches without reaching the thermostat setting is worth investigating before it fails entirely. The cause might be a refrigerant charge that has dropped, an evaporator coil that is fouled and restricting heat transfer, a blower that is not moving enough air through the duct system, or ducts that are losing conditioned air before it reaches the rooms it is meant to serve. Filters, airflow and thermostat settings explain more faults than people expect, and a diagnostic visit works through the likely causes in order before any repair is proposed.
A single thermostat controlling a whole house works well when the layout is simple and the duct runs are balanced. When some rooms are always too warm and others always too cold, or when different parts of a property need to be held at different temperatures, a zoning system or a smart-control upgrade changes what the equipment can do. We install programmable and smart thermostats, configure zone dampers, and set up multi-zone systems on both ducted and ductless equipment.
Booking a service call starts with a conversation. Describe what the system is doing, or what it has stopped doing, and the person who answers can tell you what the visit will cover and what it costs. Nothing is scheduled until the price is confirmed and you are ready to move forward.
For properties with no heat or no cooling at all, we take short-notice calls and schedule visits as quickly as the calendar allows. We are available every day from 8:00 AM to 9:00 PM, including weekends. If the property is a rental unit or a commercial space that has to stay occupied and operational, tell us that on the call. We work around the situation.
We keep you informed from diagnosis to final test. That means you hear what was found, what the repair involves, and what it costs before any work beyond the diagnostic is authorized.
A repair makes sense when the fault is isolated, the equipment is in reasonable condition, and the cost of fixing it is clearly less than the cost of replacing it over any realistic time horizon. A failed capacitor, a dirty flame sensor, a refrigerant leak at a service port, or a blower motor that has seized are all jobs where repair is usually the sensible answer, assuming the rest of the system is in decent shape.
Replacement becomes the better option when the repair cost approaches a significant fraction of what new equipment would cost, when the system is old enough that efficiency has dropped well below what current equipment delivers, or when the fault points to a component whose failure tends to signal broader wear. A cracked heat exchanger is one example. A compressor that has failed on a system past its expected service life is another.
We lay out both options plainly. The difference between a repair and a replacement gets explained before anything is authorized, so you can weigh the cost against the age and condition of what you have.
The visit starts with what the system is doing. The technician works through the components most likely to be involved based on the symptoms described on the call, inspects the air handler, blower, coil, and controls, and runs the equipment through its cycle to see how it behaves under load.
Once the cause is identified, you hear what was found in plain terms: what the fault is, what the repair involves, and what it costs. No work beyond the diagnostic is started until you agree to it. If the system needs a part that is not immediately available, that gets communicated then, not after the fact.
The system is tested before the visit ends. After a repair is made, the system is cycled through and confirmed to be operating correctly. If something still needs attention, you hear about it at the visit, not in a follow-up call. Work is carried out to code on every job, and we do not leave a property with an open question about whether the fix held.
The price for a service call is confirmed on the phone before the visit is scheduled. That covers the diagnostic: the technician coming out, inspecting the system, and identifying the cause of the problem. Repair parts and labor are quoted separately once the fault is known.
What moves a quote from one number to another is what the fault turns out to be, what has to be reached to address it, and whether a repair or a replacement is the better answer once the system is open. A refrigerant leak that traces back to a damaged coil costs more to address than one at a service fitting. A blower motor replacement on a system with a tight air handler takes longer than one with straightforward access. We explain what changed and what it means for the cost before any additional work is authorized. Where a Tigard job fits is easier to see on the page covering our heating and cooling services.
Call (971) 459-8956 to get a price before anything is scheduled.
We serve Tigard as a primary area and work throughout the surrounding communities in Washington County. If your property is in King City, Metzger, Durham, Bull Mountain, or Garden Home-Whitford, call and we will confirm coverage at your address.
Commercial rooftop units are covered as well as residential split systems and ductless equipment. Whether you are a homeowner dealing with a furnace that has stopped working or a property manager handling a rooftop unit on a small commercial building, the process is the same: the job is scoped on the call, the price is confirmed before the visit, and the system is tested before we leave.
We are available every day from 8:00 AM to 9:00 PM, including weekends.
Call (971) 459-8956 and we will schedule the visit for a time that works.
Closing vents in unused rooms is generally not recommended. Most forced-air systems are designed to distribute air across all the vents, and closing some of them increases static pressure in the duct system, which can reduce airflow, strain the blower motor, and cause the system to work harder than it needs to. If you want to control temperatures room by room, a zoning system is the better approach.
Most modern smart thermostats are compatible with standard forced-air systems, heat pumps, and multi-stage equipment, but compatibility depends on the wiring at the existing thermostat location. Some older systems lack the common wire that many smart controls require. When you call, describe the existing thermostat and we can advise on what the installation is likely to involve.
Yes. Newer equipment still benefits from annual maintenance because it catches installation issues that may not have been apparent at commissioning and confirms that the system is operating at the efficiency it was designed for. A tune-up on a newer system is generally quicker than on older equipment.
Tigard's housing stock includes a wide range of equipment, from older forced-air furnaces in postwar homes to heat pumps and ductless mini-splits installed in the last several years. The age and type of equipment do affect the repair: an older furnace may need parts that take longer to source, and a ductless system has a different diagnostic process than a ducted split system. When you call, describe the equipment you have and we will tell you what the visit will cover.
Permit requirements vary depending on the scope of the work and whether it involves new equipment or a like-for-like replacement. We can tell you what typically applies for the type of job you are scheduling and confirm what is needed at your address before the visit is set. We do not leave that question open.
Most diagnostic and repair visits are completed within a few hours, and we work around occupied properties when the situation calls for it. Tell us on the call that the property is tenant-occupied and what the access situation is. We scope the visit accordingly and let you know what to expect before anything is scheduled.
We are available every day from 8:00 AM to 9:00 PM, which gives some flexibility for scheduling around business operations. Call and describe what the property needs and we will check what the schedule allows within those hours.
Real experience. Local knowledge. Comfort is the job.
Call (971) 459-8956 during our hours, every day from 8:00 AM to 9:00 PM, and get a price before any repair or replacement is authorized.
That is how every job starts, and it is how every job is settled. We are ready to take your call.
Nearby, we also cover: Tualatin, Beaverton, Sherwood, Aloha. For every town we reach, see our full list of towns.
We cover heating and cooling for homes, rental properties, and commercial buildings throughout Tigard and the surrounding Washington County area. Whether you need a quick repair, a full system replacement, or a first-time cooling install before summer, we scope the job on the call and give you a price before anything is scheduled. The table below lays out what each service covers and who it fits best. Call us to talk through your situation and get the work on the calendar.
| Service Type | What's Included | Common Needs | What to Keep in Mind |
|---|---|---|---|
| AC Repair & Service |
| Homes or buildings where the AC is running but not cooling, or not starting at all | Washington County summers have pushed older systems hard in recent years. A diagnostic visit identifies what the system needs before assuming a full replacement is required. |
| Heat Pump Electrification |
| Tigard homeowners looking to move away from gas heating | Oregon's mild winters keep heat pump efficiency high across most of the heating season. Smart-control compatibility is part of the conversation before the install is scheduled. |
| HVAC System Installation & ReplacementMost Popular |
| Homeowners, landlords, and property managers whose system has reached the end of its service life | Oversized equipment short-cycles and wears out faster. Undersized equipment runs constantly. We match the unit to the space before the install date is set. |
Call us to talk through your heating or cooling situation and get a price before anything is scheduled.
(971) 459-8956